胜利断块油藏细分注水技术界限研究

老油田进入特高含水期后,剩余油分布更加零散,各种地质因素也因长期注水开发而发生了一定的改变.此时稳油控水难度进一步加大,为了进一步挖掘剩余油,控制含水上升速度、减缓产量递减,必须对注水井采取进一步的细分调整.基于水湿油藏注水井注水层段吸水效果,从注入水受力分析入手,运用达西定律推导出了水驱油藏水驱油全过程中的单位体积注入水沿竖直、地层两个方向运移的渗流速度公式,明晰了水驱油藏注水层段不同开发阶段砂岩吸水机理.研究结果表明,水驱油藏细分注水效果与岩石绝对渗透率、水相相对渗透率、注入水黏度、水动力压力梯度、注水井启动压力梯度、含水饱和度、地层倾角、油水密度差等参数有关.结合胜利油田断块油藏地质特征及细分注水工艺要求,制定了一套适合胜利油田不同断块区的细分注水技术政策界限:层段内渗透率变异系数小于0.3,砂岩条带宽度极比小于2.5,且东辛油区断块油藏层段内砂岩厚度小于6m,小层数小于4个;现河油区断块油藏层段内砂岩厚度小于5m,小层数小于5个;临盘油区断块油藏层段内砂岩厚度小于6m,小层数小于6个.矿场试验证实,该细分注水技术政策界限是合理、实用的,其为胜利断块油藏注上水、注够水、注好水,实现多层断块油藏的高效开发提供了技术保障,对类似油藏细分注水技术界限研究具有一定的借鉴意义.     

Influence of the Oxide Content in the Catalytic Power of Raney Nickel in Hydrogen Generation

The influence of oxides in the hydrogen evolution on Raney nickel electrocatalysts was characterized by electrochemical impedance measurements. In addition, these materials show competitive overpotentials for hydrogen evolution with a modified Watts bath as a binder for the Raney nickel. The optimum result was ?190?mV of overpotential at 100?mA?cm^?2. Oxygen in the Raney Ni catalyst affects its electroactivity toward hydrogen evolution. The source of oxygen is related to the presence of chloride ions in the modified Watts bath. A Watts bath binds Raney Ni particles to the surface of the catalysts and chloride regulates the oxygen content in the nickel binder during electrodeposition. High oxygen content increases the hydrogen evolution overpotential of the electrode. The electroactivity of the synthesized porous coatings was evaluated by polarization curves and impedance plots. In addition, surface characterization by X-ray diffraction, field emission–scanning electron microscopy equipped with energy-dispersive analysis, and X-ray photoelectron spectroscopy is reported.     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Improved separation and size characterization of gold nanoparticles through a novel capillary zone electrophoresis method using poly(sodium4‐styrenesulfonate) as stabiliser and a stepwise field strength gradient

A novel capillary zone electrophoresis (CZE) method was developed for an improved separation and size characterization of pristine gold nanoparticles (AuNP) using uncoated fused‐silica capillaries with UV‐Vis detection at 520 nm. To avoid colloid aggregation and/or adsorption during runs, poly(sodium 4‐styrenesulfonate) (PSS) was added (1%, w/v) in the running buffer (CAPS 10 mM, pH 11). This polyelectrolyte conferred an enhanced stabilization to AuNP, both steric and electrostatic, exalting at the same time their differences in electrophoretic mobility. Resolution was further and successfully improved through a stepwise field strength gradient by the application of 25 kV for the first 5 min and then 10 kV. Migration times varied linearly with particles diameters showing relative standard deviations better than 1% for daily experiments and 3% for interday experiments. A comparison with the size distribution obtained by transmission electron microscopy (TEM) allowed assessing that the electrophoretic profile can reasonably be considered as representative of the effective size heterogeneity of each colloid. Finally, the practical utility of the proposed method was demonstrated by measuring the core diameter of a gold colloid sample produced by chemical synthesis which was in good agreement with the value obtained by TEM measurements.     

Toward amino acid typing for proteins in FFLUX

Continuing the development of the FFLUX, a multipolar polarizable force field driven by machine learning, we present a modern approach to atom‐typing and building transferable models for predicting atomic properties in proteins. Amino acid atomic charges in a peptide chain respond to the substitution of a neighboring residue and this response can be categorized in a manner similar to atom‐typing. Using a machine learning method called kriging, we are able to build predictive models for an atom that is defined, not only by its local environment, but also by its neighboring residues, for a minimal additional computational cost. We found that prediction errors were up to 11 times lower when using a model specific to the correct group of neighboring residues, with a mean prediction of ∼0.0015 au. This finding suggests that atoms in a force field should be defined by more than just their immediate atomic neighbors. When comparing an atom in a single alanine to an analogous atom in a deca‐alanine helix, the mean difference in charge is 0.026 au. Meanwhile, the same difference between a trialanine and a deca‐alanine helix is only 0.012 au. When compared to deca‐alanine models, the transferable models are up to 20 times faster to train, and require significantly less ab initio calculation, providing a practical route to modeling large biological systems. © 2016 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Accurate van der Waals force field for gas adsorption in porous materials

An accurate van der Waals force field (VDW FF) was derived from highly precise quantum mechanical (QM) calculations. Small molecular clusters were used to explore van der Waals interactions between gas molecules and porous materials. The parameters of the accurate van der Waals force field were determined by QM calculations. To validate the force field, the prediction results from the VDW FF were compared with standard FFs, such as UFF, Dreiding, Pcff, and Compass. The results from the VDW FF were in excellent agreement with the experimental measurements. This force field can be applied to the prediction of the gas density (H₂, CO₂, C₂H₄, CH₄, N₂, O₂) and adsorption performance inside porous materials, such as covalent organic frameworks (COFs), zeolites and metal organic frameworks (MOFs), consisting of H, B, N, C, O, S, Si, Al, Zn, Mg, Ni, and Co. This work provides a solid basis for studying gas adsorption in porous materials. © 2017 Wiley Periodicals, Inc.